CONCEPT COMPONENT / REVISION A
M–04
Transfer
module.
A compact enclosure, 300 × 180 × 120 mm,
with a 120 mm inlet collar.
01 / DIMENSIONAL RECORD
Four dimensions,
all in millimetres.
- Envelope width
- 300 mm
- Envelope height
- 180 mm
- Envelope depth
- 120 mm
- Inlet diameter
- 120 mm
- Drawing status
- Concept / not to scale on screen
02 / SIDE PROJECTION
Read depth from the side.
- Envelope depth, 120 mmMeasured across the side elevation; the body depth in the dimensional record.
- Inlet diameter, Ø 120 mmThe collar projects from the front face. Its diameter is a drawing label, not a performance figure.
03 / ASSEMBLY SEQUENCE
- 01
Housing
A single rectangular body sets the envelope. The four corner marks in the drawing show where fixings would sit.
Joint: body to front face at the corners.
- 02
Inlet collar
The circular collar sits centred on the front face.
Joint: collar seat on the front face.
- 03
Corner fixings
Four fixings are drawn but not specified. Type, torque and material need engineering review before any real assembly.
Joint: four corner fixings, unspecified.
The sequence explains how the drawn parts relate. It is not an assembly procedure.
Document notes
No safety certification, load capacity, airflow performance or manufacturing suitability is implied.
Read the drawing boundary
Do not use this schematic as a construction or installation document.